Factory Direct Sale: Glass Tube CO2 Laser Marking Machine

Application	Laser Engraving	Working Temperature	15°C-45°C
Laser Source Brand	Reci/ Efr/ Yongli	Marking Area	300300mm/600mm600mm
Control System Brand	Bjjcz	Key Selling Points	Competitive Price
Voltage	110V/220V, 50Hz/60Hz	Marking Depth	0.01-1.0mm(Subjejct To Material)
Graphic Format Supported	Ai, Plt, Dxf, Bmp, Dst, Dwg, Dxp	Laser Power	80w/100w/150w/180w
Working Accuracy	0.01mm	Certification	Ce, Iso9001
Video Outgoing-Inspection	Provided	Mode Of Operation	Continuous Wave
Linear Speed	≤7000mm/s	Cooling System	Water Cooling
Control System	Jcz	Software	Ezcad Software
Mode Of Operation	Pulsed	Feature	Low Maintenance
Applicable Industries	Building Material Shops, Manufacturing Plant	Positioning Method	Double Red Light Positioning
Key Selling Points	Easy To Operate	Graphic Format Supported	Ai, Plt, Dxf, Dwg, Dxp
Place Of Origin	Jinan,Shandong Province	Warranty Time	3 Years

Compared with traditional marking technology, the advantages of co2 laser marking machine are that the laser marking is clear, permanent, fast, high-yield, and pollution-free; graphics, text and serial numbers can be edited by software, easy to change, and laser 30,000 hours Maintenance-free, no consumables, low cost of use, energy saving, environmental protection label, in line with ROHS standards.

Disadvantages of carbon dioxide laser marking machine:

The laser of the carbon dioxide laser marking machine is a gas laser with a wavelength of 1064um in the infrared band. It uses RF laser and high-speed galvanometer, so the price of Co2 laser marking machine is higher than that of semiconductor. Carbon dioxide laser marking machines have certain limitations. It cannot mark products made of metallic materials. It is mainly used to mark wood, acrylic, leather and other non-metallic materials.The air-cooling method used by the RF tube can be used stably for a long time without failure. The glass tube is water-cooled. If the continuous processing time of the equipment is too long or the water temperature is not within a constant range, there may be no light or unstable light output. Continuous operation will affect the quality of the product. bigger. 2. Differences in stability The co2 radio frequency tube is relatively stable. The radio frequency tube is a fully sealed metal tube and uses a 30-volt bottom voltage power supply, which directly avoids some hidden dangers caused by the use of high-voltage power supplies. Glass tube-laser cutting machines are generally used It is a high-voltage power supply of more than 1000 volts. In addition to being unstable, there are certain dangers. Working for a long time makes the power supply easy to age, and has great interference to the control system. affect its normal function. 3. different spots The light spot of the co2 radio frequency tube is 0.07mm, the light spot is fine, the precision is high, and the thermal diffusion area is small, which can be finely processed. The light spot of the glass tube is 0.25mm, which is more than three times that of the radio frequency tube. The light spot is relatively thick and the accuracy is relatively poor. , The light output is unstable, the heat diffusion area is large, the cutting edge is melted, and the blackening is obvious. 4. Service life The service life of the laser of the radio frequency tube can reach more than 50,000 hours, and there is no problem in the general use of about 6 years, while the general use of the glass tube is 2,500 hours, and the glass tube needs to be replaced every six months or so. From the above comparison, it can be seen that the RF tube is superior to the glass tube in all aspects. If the product requires low precision, the glass tube is completely sufficient.Glass tube Co2 laser marking machine with 300*300 working area

Glass tube CO2 Laser Marking Machine

Products Details

Featured Products

Contact us